What setting should I use on my Scotts spreader?
Locate the orange dial on the spreader and turn it to the setting specified on the seed or fertilizer bag. Turn counterclockwise to reach a lower setting of three or five, or clockwise to reach a higher setting of 12 or 14, which is for larger granules or grass seed.
What setting should my seed spreader be on?
Spread the material over a 50 x 20-foot area (1,000 square feet) with your spreader setting on a low setting (typically one-fourth of the spreader setting range or less). If there is material left over, increase your setting. If you come up short, decrease your setting.
What spreader setting should I use for Scotts EZ seed?
Since Scotts EZ Seed Patch and Repair Sun and Shade is used at 20 lbs to treat only 445 square feet, you would need a fairly high spreader setting.
What do the numbers on my Scotts spreader mean?
If you dont adjust your spreader to the numbers on your fertilizer, you might end up with an uneven and patchy lawn. These numbers represent settings for distributing the fertilizer, and theyre crucial because they determine how quickly the fertilizer will get applied to the ground.
Can I use a spreader for grass seed?
The most effective way to spread out grass seed, fertilizer, weed killer, and other lawn products on your lawn is to use broadcast spreaders properly.
Are Scotts spreader settings lbs per 1000 sq ft?
per 5000 square feet or 8 pounds per square foot on March 17, 2014
How do you determine spreader settings?
Calibrating Your Spreader
- 100 divided by the area that the fertilizer bag covers in square feet.
- Multiply this amount by the bags weight.
- The quantity of fertilizer required to cover 100 square feet is the solution.
- Put this quantity into the spreader.
- Set a 10 x 10 ft. area aside.
- Use the recommended setting when applying.
What do the numbers on my spreader mean?
Youll use the numbers on a spreader, frequently guided by the directions on the fertilizer, to decide the most efficient way to spread the product. These numbers tell you how much fertilizer or product will be applied over a certain amount of land.
What setting should I use on Scotts spreader for lime?
Pelletized lime should be applied every other year (approximately 15 lbs./1,000 ft²) once you have your soil pH to its optimum level, which is between 6.0 and 6.5.
Lime.
| Spreader | Setting |
|---|---|
| Scotts (Drop) | 11.5 |
| Scotts (Broadcast) | J |
| Earthway EV-N-SPRED | 21 |
| Greenview | 3 or 4 |
What is the setting for Scotts speedy green 3000?
If this is what you meant to say, or if the settings on those two spreaders work for you, you can use setting 2 3/4 to spread 1.15 lbs per 1000 square feet, 5 1/4 to spread 2.3 lbs per 1000 square feet, or 9 to spread 4.6 lbs per 1000 square feet.
What month do you apply Scotts Turf Builder?
Apply Scotts Turf Builder Annual Program Spring between April and June, but at least 6 to 8 weeks after applying the Early Spring product, to help your lawn continue to flourish during the spring and kill troublesome broadleaf weeds.
What setting should I put my Scotts spreader grass seed on?
For overseeding with a Scotts rotary spreader, use a setting of 6 1/4; for new lawns or to repair bare spots, use the same setting; however, Scotts advises going over the area twice. For overseeding with a Scotts drop spreader, use a setting of 9 1/2; for new lawns or to repair bare spots, use a setting of 15.
What setting on Scotts spreader for overseeding?
With a handheld broadcast spreader, Scotts suggests a setting of 4 when overseeding or seeding a new lawn but advises the sower to make two perpendicular passes for new areas. Scotts recommends a setting of 5 1/2 when overseeding and a bare-lawn setting of 8 1/4 for application.
What do the numbers on a seed spreader mean?
The%age of the nutrients Nitrogen (N), Phosphorus (P), and Potassium (K), collectively referred to as NPK and specially formulated for various growing requirements to grow healthy plants, are indicated on fertilizer bags by numbers that look like these: 10-20-15.
What setting should I use on Scotts Edgeguard for grass seed?
Using your Edgeguard Mini broadcast spreader properly will ensure accurate, even coverage and reduce costly seed waste. Set the orange dial to 13 when applying grass seed for a new lawn, or repairing bare spots, and to 7 1/2 when overseeding applications.
Can I use my fertilizer spreader to spread grass seed?
Although the same tool can be used for both fertilizer and seed, you shouldnt mix or spread them at the same time because the two materials require slightly different handling techniques.
How are spreader settings calculated?
Calibrating Your Spreader
- 100 divided by the area that the fertilizer bag covers in square feet.
- Multiply this amount by the bags weight.
- The quantity of fertilizer required to cover 100 square feet is the solution.
- Put this quantity into the spreader.
- Set a 10 x 10 ft. area aside.
- Use the recommended setting when applying.
How do you use a grass seed drop spreader?
Place your drop spreader close to the edge of your lawn, pull the lever to turn it on, and walk normally around the perimeter of your lawn to evenly scatter grass seed.
